Nigeria CRIA certification (Clean Report of Inspection and Analysis) is mandatory by the Nigerian National Agency for Food and Drug Administration and Control (NAFDAC) Pre-shipment Compliance Verification Procedure . This certificate is a necessary document for controlled products to complete customs clearance at Nigerian ports. Goods that do not hold a valid CRIA certificate will not be cleared. CRIA is parallel to the SONCAP certification led by the Nigerian Bureau of Standards, but the focus is different: CRIA is under the jurisdiction of NAFDAC , mainly for food, drugs, cosmetics, medical devices and Chemicals (including raw materials) and other sensitive products; SONCAP is under the jurisdiction of the Bureau of Standards and is applicable to general commodities such as clothing, shoes and hats, machinery and equipment.
Nigeria CRIA certificate.
1. Certification process
The core logic of CRIA certification is "inspection first, then shipment". The entire process is roughly divided into the following links:
Commission and preliminary review : The exporter fills out the "CRIA Inspection Request Form", and the agency conducts a preliminary review of the declaration information. After passing the application, it issues an "Inspection Requirement" listing the required documents, samples and fees.
Documentation and sample preparation : Submit a complete set of application materials and test samples according to the "Inspection Requirements".
Laboratory testing : Authorized agency conducts laboratory analysis of samples to verify compliance with Nigerian standards.
Cabinet installation supervision (if required) : For products that require installation supervision, the exporter must submit a pre-shipment inspection application form one day before loading, take photos according to the installation supervision requirements and submit a supervision inspection record form.
Certification and confirmation : After the inspection is correct, the organization will issue an electronic version of the CRIA certificate for confirmation, and then send the original copy.
Key reminder : CRIA is Pre-ship certification , the product can only be shipped after passing the test. If the goods are shipped without authorization before the inspection results are available, the certificate will not be issued due to substandard quality, and the exporter will be responsible for any related losses.
2. Application information list
According to the "Inspection Requirements", the following documents need to be prepared to apply for chemical CRIA certification (organized from the perspective of the exporter/entrusting unit):
Business Documents
CRIA inspection order form (stamped with the official seal of the entrusting unit, WORD version + stamped scanned copy)
Packing list and commercial invoice (stamped, must be consistent with the actual goods, and will be inspected by Nigeria Customs along with the CRIA certificate)
Business license of the entrusting unit (exporter)
Invoicing information
CRIA certification fee confirmation form (stamped with official seal; no need to provide if payment has been made)
Production enterprise qualification documents
Actual manufacturer business license
Quality assurance and quality control documents/samples
Production license for pre-approval products (if applicable)
Production and inspection standards: national standards, industry standards or Chinese Pharmacopoeia; if foreign standards or enterprise standards are used, the manufacturer’s quality inspection seal or official seal needs to be stamped (the first page is stamped separately, and other pages are sewn). English foreign standards must be accompanied by a translation
Chinese and English quality analysis sheet (COA, stamped with manufacturer’s quality inspection seal)
Quality inspection records (including original data such as maps, stamped with manufacturer’s quality inspection seal)
Foreign approval qualification documents
NAFDAC registration certificate (scanned copy)
Import license/import quota table (scanned copy)
Foreign government procurement/donation tax exemption certificate (if applicable)
FORM M
Others
Bill of Lading
Installation supervision information form (WORD version, provided after the official bill of lading is issued)
Electronic documents need to be packaged and sent to CRIA@CSTSLAB.COM , and then send the paper document to the designated address after confirming it is correct.
3. Cost and timing
Fee structure
According to the attached "CRIA Certification Fee Confirmation Form", the basic fee structure for a single batch of chemicals (taking toluene diisocyanate as an example) is as follows:
| Charged items | Amount/Rate | Quantity | Subtotal |
|---|---|---|---|
| CRIA certificate fee | USD 300 (exchange rate 6.78) | 1 batch | RMB 2,034 |
| Document Review/Laboratory Inspection Fee | RMB 950/batch | 1 batch | RMB 950 |
| Port loading supervision fee | RMB 5,000/time | 1 batch | According to the fee confirmation |
| On-site sampling/inspection fee | RMB 3,000/person·day | 1 batch | According to the fee confirmation |
| Other comprehensive expenses | — | — | According to the fee confirmation |
| Total charges (tax included) | — | — | Welcome to inquire and quote |
NOTE: The above table is an example quote for a specific chemical lot. The actual cost varies depending on the product category, testing items and whether installation supervision/sampling is required, and must be subject to the official "Cost Confirmation Form" issued by the organization.
Certificate issuance timing
in After all the fees and documents have been received Starting from 7 working days . If you choose expedited service, it can usually be shortened to within 7 days, and the expedited fee is 30% of the normal quotation (the expedited fee for this batch is listed as 0 in the attachment). As a reference, the industry's routine inspection timing is generally 10-15 working days.
4. Key precautions
batch independence : According to NAFDAC requirements, All shipments are subject to independent inspection , a certificate from a previous batch of the same product cannot be substituted for a subsequent batch.
NAFDAC registration is a prerequisite : CRIA application relies on the local registration of the importer/product with NAFDAC, and the application cannot be submitted without registration qualifications.
New system connection : New system has been launched in Nigeria in 2026 B‘Odogwu , the old version of the NAFDAC certificate may be invalid. Before exporting, be sure to confirm that the certificate has been updated to the latest system version.
Summary : CRIA certification is a rigid requirement for customs clearance of chemicals exported to Nigeria. The core lies in Complete document review and laboratory testing before shipment . It is recommended to reserve at least 2-3 weeks ’s lead time (including NAFDAC registration status verification and data preparation), the certificate can be issued within 7 working days after the documents and fees are received. Compliance judgment for
Business Contact Mr. Zhou Tel: 0755-26996194 13530227809
————END————

