Indonesia SDPPI certification
SDPPI (Direktorat Jenderal Sumber Daya dan Perangkat Pos dan Informatika), the Indonesian Directorate of Resources, is a regulatory agency that formulates, plans and implements standardization guidelines and policies in the field of radio and communications. It also has public service functions and can issue radio spectrum licenses, including supervising interference and imbalance of radio frequency spectrum. It is an organization with wireless/communication testing and certification capabilities. All radio and communication products entering or produced in Indonesia must obtain a type certification certificate issued by the Indonesian SDPPI government agency.
1. Certification introduction
In order to ensure that telecommunications products can be used more reliably and safely, the Directorate General of Resources and Equipment of Post and Information Technology of Indonesia issued Regulation No. 16, which stipulates the scope of compulsory certification products for telecommunications products. Corresponding telecommunications products need to obtain SDPPI certificates and print labels before they can legally enter the Indonesian market.
The Indonesian Directorate of Resources, as a subordinate department of the Ministry of Telecommunications of Indonesia, is the policy-making and regulatory agency in charge of telecommunications and related fields. It is also responsible for document review and certification.
The product scope of SDPPI certification mainly includes cellular mobile devices, Bluetooth, laptops, mobile phones, WLAN, routers, radars, set-top boxes, wireless phones, antennas, cables, etc. With the promulgation of more new regulations and implementation details, more and more products are included in the scope of SDPPI compulsory certification. Currently, all products with wireless functions require certification.
2. Knowledge graph of Indonesia POSTEL SDPPI certification.
SDPPI certification | |
Regulatory authorities | Indonesia DGPT |
Issuing authority | SDPPI Bureau |
Local testing requirements | SDDPPI accredited laboratory |
timing | 10~12 weeks |
Number of samples | At least 2 sets |
Basic information | Year validity + expiry update |
Mandatory certification | |
No factory audit required | |
CE-RF Radio Frequency Test | |
Local importer holds license | |
Authorization letter | |
Other designated printing documents | |
Notes: | 1. As of September 1, 2014, there is no A or B SDPPI certificate. 2. Manufacturers or importers can directly apply for SDPPI certificate; 3. SDPPI is valid for three years and can only be extended for one or three years. |
3. Indonesian SDPPI certification standards
1.BT Bluetooth: No.09/DIRJEN/2004
2.WLAN Wireless LAN: Issue 28/PERMEN/2015
3.SRD Short Range Radio: No. 214/DIRJEN/2005
4.GSM cellular mobile communications: No.370/DIRJEN/2010
5.WCDMA:No.173 / DIRJEN / 2009
6.LTE: TAHUN No. 27 in 2015
4. Indonesia SDPPI certification process method
Certification Process
Authentication method:
Indonesia SDPPI certification, there are currently two methods to obtain the certificate.
1. Apply for certification after testing directly in a local authorized laboratory. The prototype needs to be sent to Indonesia, and the cost is lower.
2. Use the CE test report (RF/EMC/Safety) of the designated testing agency to apply for certification. There is no need to send a prototype, and the cost is higher.
*. The time during which SDPPI can apply for certification using foreign test reports has been extended by 6 months to 2021/12/31.
*. Certification application fees using CE test reports are expected to become more expensive.
5、 How much does it cost and how long does it take to apply for Postel & SDPPI certification?
1) Different products should have different test contents;
2) Different types of products have different testing costs and timing;
6. SDPPI POSTEL certification mark
Devices that are approved and receive a SDPPI Certificate of Approval must be marked with a label, QR code, and warning sign as follows:
1. The label must include the certificate number as well as de PLG ID number (registration number of the certificate holder)
2. The QR code must appear on the approval certificate issued by SDPPI or can be downloaded from the applicant's SDPPI user account. The QR code must be affixed to the packaging of the product.
3. Warning signs must always be affixed to the packaging and a warning statement provided next to the packaging as follows:
NOTE: Changes to specifications that may cause physical and/or electromagnetic interference to the surrounding environment are prohibited.
7.SDPPI certificate template
8. Business contact
13530227898
————END————







