What are the common SASO standards for Saudi Saber certification for building materials export?
Building materials include the following types
1. Structural building materials. Including wood, stone, soft porcelain, concrete, metal, bamboo, reinforced cement, bricks, glass, engineering plastics and composite materials.
2. Floor building materials. Including solid wood flooring, laminate flooring, multi-layer composite flooring and bamboo flooring, etc.
3. Decorative building materials. Including solid wood boards, paint-free boards, large core boards, thin core boards, density decorative boards, melamine boards, baking paint boards, cement boards, etc.
4. Sanitary ware and building materials. Including faucets, bathroom cabinets, towel racks, showers, wash basins, toilets and shower rooms, etc.
5. Wall building materials. Including ceramic tiles, paints, veneers, wallpapers, marble, glass, etc.
Serial number Standard number Standard name
1 SASO ASTM A706/A706M-16 / ASTM A706/A706M-16 Specifications for low alloy steel special-shaped and smooth steel bars for concrete reinforcement
2 SASO ASTM A615/A615-18e1 / ASTM A615/A615-18e1 Specifications for special-shaped and smooth carbon steel bars for concrete reinforcement
3 SASO ASTM A6/A6M-19 / ASTM A6/A6M-19 Standard specification for general requirements for rolled structural steel bars, plates, profiles and sheet piles
4 SASO ASTM A242/242M-13(2018) / ASTM A242/242M13(2018) Standard Specification for High Strength Low Alloy Structural Steel
5 SASO ASTM A514/A514-18e1 / ASTM A514/A514-18e1 Standard specification for tempered and quenched high yield strength alloy steel plates suitable for welding
6 SASO ASTM A588/A588M−19 / ASTM A588/A588M−19 Standard specification for high-strength low-alloy structural steel with a minimum yield point resistant to atmospheric corrosion not exceeding 50ksi [345mpa]
7 SASO ASTM A913/A913M−19 / ASTM A913/A913M−19 Standard specifications for high-strength low-alloy structural quality steel sections produced by quenching and recycling processes
8 ASTM ISO 10799-1:2011/ISO 10799-1:2011 Cold-formed welded structural hollow sections of non-alloy and fine-grained structural steels Part 1: Technical delivery conditions
9 SASO ISO 10799-2:2011/ISO 10799-2:2011 Cold formed welded structural hollow sections of non-alloy and fine-grained structural steels Part 2: Dimensions and cross-sectional properties
10 SASO ASTM A1064/A106M −18a/ASTM A1064/A1064M −18a Standard specification for smooth and special-shaped carbon steel wire and welded steel bars for concrete
11 SASO ISO 630-1:2011/ ISO 630-1:2011
12 SASO ISO 630-2:2011/ISO 630-2:2011 Structural steel Part 2: Technical delivery conditions for general purpose structural steel
13 SASO ISO 630-3:2012/ISO 630-3:2012 Structural steel Part 3: Technical delivery conditions for fine-grained structural steel
14 SASO ISO 630-4:2012/ISO 630-4:2012 Structural steel Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel
15 SASO ISO 630-5:2014/ ISO 630-5:2014 Structural steel Part 5: Improved technical delivery conditions for gas corrosion-resistant structural steel
16 SASO ASTM A36/A36M-19/ASTM A36/A36M-19 Standard Specification for Carbon Structural Steel
17 SASO ISO 16143-1:2014/ISO 16143-1:2014 Stainless steel for general purposes Part 1: Corrosion-resistant flat products
18 SASO ISO 16143-2:2014/ISO 16143-2:2014 Stainless steel for general purposes Part 2: Semi-finished products, rods, wires and profiles
19 SASO ISO 16143-3:2014/ ISO 16143-3:2014 Stainless steel for general purposes Part 3: Metal wire
20 SASO EN 10138-1:2000/ EN 10138-1:2000 Precast steel Part 1: General requirements
21 SASO ISO 6362-1:2012/ISO 6362-1:2012 Deformed aluminum and aluminum alloys Extruded rods/bars, tubes and profiles Part 1: Technical conditions for acceptance and delivery
22 SASO ISO 6362-2:2014/ ISO 6362-2:2014 Deformed aluminum and aluminum alloys Extruded bars/bars, tubes and profiles. Part 2: Mechanical properties
23 SASO ISO 6362-3:2012/ ISO 6362-3:2012 Deformed aluminum and aluminum alloys Extruded rods/strips, tubes and profiles Part 3: Extruded rectangular rods Dimensional specifications and shape tolerances
24 SASO ISO 6362-4:2012/ISO 6362-4:2012 Deformed aluminum and aluminum alloys Extruded rods/bars, tubes and profiles Part 4: Extruded profiles Dimensional specifications and shape tolerances
25 SASO ISO 6362-5:2012 / ISO 6362-5:2012 — Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
26 SASO ISO 6362-6:2012/ISO 6362-6:2012 Deformed aluminum and aluminum alloys Extruded rods/bars, tubes and profiles Part 6: Circular, square, rectangular and hexagonal tubes. Shape tolerances and size specifications
27 SASO ISO 6362-7:2012/ISO 6362-7:201 Deformed aluminum and aluminum alloys Extruded rods/rods, tubes and profiles Part 7: Chemical composition
28 ASTM A572/A572M-18 High strength low alloy niobium vanadium structural steel
29 ASTM A1011/A1011M-18a
Business Contact
Mr. Zhou Tel: 0755-26996192 13530227809
E-mail: zhengsheng.zhou@wsct-cert.com
_____END____
Saber certification, Saudi sabe certification, Saso certification, Saudi coc certification,

