Saudi SABER certification is essentially a mandatory product compliance certification and online registration system. It is the "entry threshold" that all controlled products to be exported to Saudi Arabia must pass. It has completely replaced the original SASO certification system.
1. What exactly is SABER certification?
SABER is an online platform launched by the Saudi Standards, Metrology and Quality Organization SASO for product registration, compliance assessment and issuance of Certificates of Conformity (COC).
It is a core component of the Saudi product safety plan SALEEM. Its goal is to ensure that all local and imported products entering the Saudi market comply with Saudi technical regulations and national standards and meet standards in safety, health, environmental protection, etc.
It will be gradually implemented in 2019 and will basically replace the traditional SASO CoC paper certification from 2020. It has now become the mainstream and mandatory way for customs clearance of goods exported to Saudi Arabia.
A vivid metaphor: SABER is like the "Saudi version of the online CCC/CE platform". If the product is not "registered and qualified" in this system, it will not be able to pass customs smoothly.
2. Two core certificates in the SABER system
In the SABER system, the two types of certificates most directly relevant to export companies are the Product Certificate PC (or PCoC) and the Shipping Certificate SC (or SCoC).
Product Certificate of Conformity PC/PCoC
For each regulated product model, there is a certificate of compliance corresponding to the product level, which is used to prove that the product complies with relevant Saudi technical regulations and standards.
is issued by a third-party certification body authorized by SASO (such as TÜV, SGS, Intertek, etc.) based on test reports, technical data and (if necessary) factory audits. The validity period is usually one year and can be used multiple times for different batches of shipments during the validity period.
Lot/Shipping Certificate of Conformity SC/SCoC
For each shipment of goods exported to Saudi Arabia, it is used to confirm that all models included in this batch of goods have a valid PC certificate, which is a customs clearance certificate.
You must apply for an SC/SCoC for each shipment. It is usually valid for about 60 days and can only be used for the corresponding batch.
Simple understanding: PC is the "ticket" for the product, and SC is the "pass" for each batch of goods to go through customs. Both are indispensable.
3. Which products require SABER?
SABER covers a very wide range, including building materials, automobiles and parts, electronic appliances, household appliances, toys, infant products, food contact materials, some medical devices, etc. Most common industrial and consumer products exported to Saudi Arabia are under supervision.
To determine whether it is a "regulated product", you need to query the HS Codes tool on the SABER official website according to the HS code. The corresponding technical regulations and required certificate types will also be displayed along with the query results.
High-risk and medium-risk products usually require more stringent testing and auditing (such as mandatory type testing, factory audits, etc.), while low-risk or unregulated products have a relatively simplified process, but they still need to be registered in the system accordingly.
For example: An LED lamp exported to Saudi Arabia is basically a controlled product and needs to undergo complete regulatory matching, testing and obtain a PC+SC certificate before it can be cleared.
4. Practical steps for Chinese companies to export to Saudi Arabia (must read)
The following is a typical process to give you a "from zero to shipment" operating framework to facilitate your evaluation of workload and cost.
1. Preparation: Confirm whether it is controlled
According to the Chinese Customs 10-digit HS code, use the SABER platform or related service agencies to convert it to the Saudi 12-digit code and query the regulatory category. [ouce]
Compare the query results to find the corresponding Saudi technical regulations (such as building materials regulations, electrical appliance regulations, toy regulations, etc.), and clarify whether it is a controlled product and the type of certificate that needs to be applied for (COC, quality mark QM, etc.).
2. Product testing and data preparation
According to regulatory requirements, complete type testing in a qualified laboratory and obtain a test report that complies with relevant standards (such as IEC/ISO standards plus the corresponding SASO adopted version).
Prepare technical documents: specifications, instructions, safety and EMC design instructions, key component lists, label and nameplate samples, etc. Some products also require quality system documents or factory audit reports.
3. Apply for PC certificate in SABER system
The Saudi importer or its agent registers an account on SABER and enters product information, and selects a third-party certification agency recognized by SASO as the reviewer.
The exporter cooperates in submitting test reports and technical information, and pays certification agency fees; after passing the review, the system also requires the importer to pay a fixed platform fee, and then issue a PC/PCoC, which is usually valid for 1 year.
4. Apply for SC certificate for each shipment
Before each shipment, the importer enters the quantity, model, and shipping information of the batch of goods in the SABER system, associates the approved PC certificate, and submits an SC/SCoC application.
The certification body will issue an SC/SCoC after the verification is correct. The importer pays the platform fee. The certificate is generally valid for 60 days and is only used for customs clearance of the corresponding batch.
5. Customs clearance and subsequent maintenance
When the goods arrive at the Saudi port or airport, the customs system will be connected to SABER/Fasah to verify whether the SC/SCoC of the corresponding batch is valid and whether the associated PC/PCoC is within the validity period.
If the certificate is found to be missing, expired, or has inconsistent information, it may result in delays, returns, or even fines. In serious cases, the product may be blacklisted.
5. Practical suggestions and risk warnings for Chinese export enterprises
Plan the certification timing in advance: SABER certification is more complex than general third-party testing. Especially when high-risk products involve factory audits, sufficient time must be reserved to avoid rushing to meet the shipping deadline for temporary certification.
Match HS codes with regulations: Wrong coding or regulatory attribution may lead to repeated certification or blocked customs clearance. It is recommended to confirm with an experienced local agent or certification agency.
Synchronize management of models and certificates: PC certificates are usually issued by model. The SC certificate can only list the models and names that have been registered on the PC certificate. A strict model management and file archiving mechanism must be established internally.
Continue to pay attention to the latest policies: SASO will update technical regulations or add new controlled categories from time to time. Starting from 2025, it has been clearly required that all goods exported to Saudi Arabia must apply for and obtain PCoC and SCoC through the SABER system. It is recommended to regularly track official or authoritative channel information.
Business Contact
Mr. Zhou Tel: +86 13530227809 13530227809
——END——

