In the Saudi SABER system, the two certificates that importers are most likely to confuse are PCoC and SCoC. Conclusion first: PCoC (Product Certificate of Conformity, product conformity certificate) is a pass for "product model", which is issued once for each model and is valid for one year; SCoC (Shipment Certificate of Conformity, batch conformity certificate) is a pass for "each shipment", which is issued once for each shipment. Both certificates must exist at the same time, and the goods cannot be cleared without either one.
What is PCoC
The PCoC is issued by a certification body recognized by the Saudi Standards, Metrology and Quality Organization (SASO), certifying that this product model complies with the Saudi Technical Regulation.
Key features:
- One product model is applied once;
- Based on product test reports and technical documentation;
- Enforced only for Regulated Products;
- It is bound to a specific product/model, so if you change the model, you have to do it again;
- Must be obtained before first import.
What is SCoC
SCoC proves that your imported goods are consistent with the certified PCoC products and meet the import requirements.
Key features:
- Every shipment must be processed;
- Based on shipping documents such as commercial invoice, packing list, bill of lading;
- Verify that this batch of goods is consistent with the PCoC registration information;
- Must be seen by customs during customs clearance.
PCoC vs SCoC understand in one table
| Dimensions | PCoC | SCoC |
|---|---|---|
| Object | Product model | Specific batch of goods |
| Frequency | Once (annual renewal) | Once per shipment |
| Basis | Test report, technical documentation | Invoice, packing list, bill of lading |
| Validity period | 1 year | Single batch |
| What will happen if there is no | Unable to apply for SCoC | Unable to clear customs upon arrival at the port |
How do the two certificates work together?
Think of it as two steps:
1. **PCoC stage**: First prove that "the product itself is qualified";
2. **SCoC stage**: Prove again that "the goods shipped this time are this qualified product".
Without PCoC, the SCoC application cannot be filed at all; without SCoC, no matter how valid the PCoC is, the goods cannot pass customs.
The 5 most common mistakes importers make
1. **Apply for SCoC first if there is no PCoC** - the system directly rejects it.
2. **HS coding classification error**——Wrong technical regulations were selected, and all the following are wrong.
3. **The test report is missing or incomplete** - the certification body will require supplementary documents, which will delay time.
4. **The actual shipment is inconsistent with the PCoC registered product** - even if it is just a difference in color and accessories, it will be stuck during customs inspection.
5. **Slow approval by the certification body** - I just wanted to do it before shipment, and the certificate has not been issued yet when the ship arrived at the port.
Frequently Asked Questions (FAQ)
**Q: Does the PCoC one-year follow-up certificate need to be retested? **
Answer: If the product has not changed and the technical regulations have not been updated, usually the document renewal is enough; if the product is changed or the regulations are updated, retesting is required.
**Q: Do I need to apply for PCoC separately for multiple models of the same product? **
Answer: Yes. Each model (or range covered by the same series) corresponds to a PCoC.
**Q: How much does SCoC cost? **
Answer: The SCoC fee per ticket is usually in the range of SAR 300–500, depending on the certification body and the value of the goods.
**Q: Do PCoC and SCoC have to be issued by the same certification agency? **
Answer: It is recommended to use the same company and smooth communication; the SABER system allows different institutions, but the process will be complicated.
Understanding the division of labor between PCoC and SCoC is a basic skill for Saudi importers’ compliance work.
Business Contact
Mr. Zhou Tel: 0755-26996194 13530227809
——END——
