Kuwait TER/TIR application experience

Frequently Asked Questions FAQ about exporting Kuwait tir certification and kucas certification

English translation of the Chinese source. Source publication date: 14 October 2023. Regulatory requirements, charges and schedules may have changed; confirm the current position before shipment. Processing and freight estimates are not guarantees.

FAQs about exporting to Kuwait

About Kuwait KUCAS

What is KUCAS?

Who is responsible for implementing KUCAS?

Who is the certification/inspection body? What is their role?

What is the scope of KUCAS?

KUCAS regulated products

Where can I find a list of regulated products?

Which regulated products are eligible for KUCAS exemption?

Occasional/one-time exporter

How do temporary or one-time exporters obtain CIB certification for regulated products?

Can an exporter of a one-time shipment apply for TIR by submitting a laboratory test report without going through the TER process?

Frequent/Regular Exporters

How can a frequent exporter of the same type/model of regulated products get their products CIB certified?

Technology Evaluation Report (TER)

What is TER? Published by whom?

Who is eligible to apply for TER?

How long is the validity period of TER?

What parameters need to be considered when publishing a TER?

Can TER applications accept test reports older than 3 years?

Can different exporters apply for TER based on the same test report?

Exporters can use TERs issued to manufacturers - is any authorization required in this regard?

Can a TER be issued to the exporter after the goods have been shipped to Kuwait?

Can a TER list products with multiple countries of origin (COO)?

Will test reports from an ISO 17025 accredited in-house laboratory be accepted for TER releases?

What procedure should be applied when listing products with multiple brand names in TER?

Technical Inspection Report (TIR)

What documents are required when applying for TIR?

How does the inspection process work?

What is a risk assessment system?

What happens if a shipment of controlled products arrives at a Kuwaiti port without TIR?

Can the designated issuing authority in Kuwait (such as sgs, bv, intertek, etc.) arrange destination inspection for shipments that have a valid TER but fail to obtain TIR in the exporting country?

Since the issuing authority has transferred the data to PAI, does the importer need to submit the TIR to PAI for customs clearance?

What procedures should be followed for exporters who have a valid TER but transport goods without TIR?

What are the new requirements for customs clearance of goods by PAI?

How does an importer obtain a customs clearance certificate?

Is there a user guide on how to register an importer entity on PAI's new online system?

tir certification fee

What is the fee structure of KUCAS?

Various problems

What is a passphrase?

Can electrical products accept standards other than IEC?

Kuwait tir certificate.png

1. About Kuwait KUCAS

What is KUCAS? What does Kuwait TIR certification mean?

KUCAS is the "Kuwait Qualification Assurance Scheme". The program is a set of procedures carried out by PAI to verify the compliance of all regulated products with Kuwait’s technical regulations on imported and domestic products in accordance with the provisions of the program.

2. Who is responsible for implementing Kuwait KUCAS?

The Kuwait Authority for Industry (PAI) has implemented the Kuwait Conformity Assurance Scheme (KUCAS) since June 17, 2006.

3. Who is the certification/inspection agency? What is their role?

PAI has currently approved IT, SGS, BV, etc. as Certification/Inspection Bodies (CIB). CIB collaborates with PAI to issue Technical Evaluation Reports (TER) and Technical Inspection Reports (TIR).

4.What is the scope of KUCAS certification?

KUCAS applies to domestically manufactured and imported regulated products.

5.KUCAS regulated products

Where can I find a list of regulated products?

Please contact us

Which regulated products are eligible for KUCAS exemption?

The following "Regulated Products" are exempt from the KUCAS compliance process: - Products holding the "Kuwait Quality Mark". - New motor vehicles holding a "GCC Certificate of Compliance". - Products imported temporarily (e.g. for display purposes) - Products forming the content of large industrial or government projects.

How to apply for kucas certification for occasional/one-time exporters

How do temporary or one-time exporters obtain CIB certification for their regulated products?

Occasional or one-time exporters can obtain certification for their regulated products by submitting a "Self-Declaration" stating that the product complies with the standards/requirements of the relevant Kuwait-approved product standards and substantiating the declaration with a "Test Report". The test report should be issued by a laboratory accredited by the exporting country's accreditation body (such as UKAS in the United Kingdom) to conduct these tests, and should indicate that the product has been tested to meet the complete requirements of the relevant standards. In addition, the goods must successfully complete technical inspection.

Can an exporter of a one-time shipment apply for TIR by submitting a laboratory test report without going through the TER process?

Exporters who make one-time shipments to Kuwait do not need to apply for TER and can directly apply for TIR. When submitting a TIR application, the exporter should submit a valid laboratory test report. After successful evaluation of the test report and technical inspection of the goods, the KUCAS Country Office will issue a TIR to the exporter.


How do frequent/regular exporters apply for kucas certification?

How can a frequent exporter of the same type/model of regulated products get their products CIB certified?

Exporters who regularly export the same type/model of regulated product can avoid the need to conduct a "full test" of the product each time they are exported by applying for a TER from the CIB.

Technology Evaluation Report (TER)

What is TER? Published by whom?

TER is a "Technology Evaluation Report". TER is issued by an approved Certification/Inspection Body (CIB) on the basis of successful type testing or test report evaluation or in some cases transfer of an existing regulated product registration/license.

Who is eligible to apply for the Kuwait TER Reporting Certificate?

Anyone can apply for and receive a TER by submitting the required supporting documents and paying the fee.

How long is the validity period of the TER certificate?

The validity period of TER is the same as that of the test report, that is, the CB report issued by the electrical product is 3 years and the non-CB report is 2 years. Test reports issued for all other products are valid for 2 years from the date of issue.

If a product has been awarded an internationally recognized quality mark, the TER is valid for the same period as is deemed valid by the certification body that granted the quality mark.

Expired CB reports submitted under CVG and new test reports covering CT testing are valid in TER for 2 years.

What parameters need to be considered when publishing a TER report?

TER is always released per brand per exporter. Therefore, one TER should be issued to the exporter for each brand. For example, an application has:

Many brands have one or more product categories

Brand - Samsung, Hitachi, Daewoo and Panasonic

Category - II-01, II-02, II-09, II-12, II-20

Each brand will issue one TER covering all applicable categories

A brand contains one or more product categories

Brand - Sony

Category - II-02, II-03, II-21

1 TER covering all categories will be released for Sony

Can TER applications accept test reports older than 3 years?

Test reports older than 3 years need to be reviewed by KUCAS CO as follows:

If the manufacturer does not have a current quality mark, the CB report can be updated by submitting a recent test report that only covers the "Essential Requirements" standard for the product listed in the relevant CVG according to the latest version of the applicable IEC.

For manufacturers with a current quality mark issued by an internationally recognized certification body that regularly audits the manufacturer, if the applicable IEC standard has not been updated within one year from the date of TER application, it can be assumed that the agency is satisfied that the product remains up to date, provided that the Kuwait national deviation is covered by the testing.

The report can be accepted if the standard version/year is still current according to the standards website.

If a standard version/year has been revised to a new version/revision and the revision is found to require additional testing of the product, additional testing must be performed. At the same time, the issuance period of TER is 1 year.

Even if the referenced standard version changes, CB test reports older than 3 years can be accepted as long as the exporter submits a statement that the product technical specifications have not changed. In this case, the validity period of the relevant model in TER will be extended for another 3 years after revalidation by the laboratory issuing the CB report.

Can different exporters apply for TER based on the same test report?

A TER is issued based on a test report regardless of the original applicant. Therefore different exporters can apply for TER based on the same test report.

Exporters can use TERs issued to manufacturers - is any authorization required in this regard?

If the manufacturer pays and obtains a TER, and the exporter submits the same TER, we can accept it based on the manufacturer's letter of authorization.

Can a TER be issued to the exporter after the goods have been shipped to Kuwait?

TER and TIR can be issued after the goods arrive in Kuwait if the exporter is licensed and the goods are not inspected. TER/TIR will be issued based on the license.

Can a TER list products with multiple countries of origin (COO)?

Products with multiple COOs can be stated in a single TER.

Will test reports from an ISO 17025 accredited in-house laboratory be accepted for TER releases?

The main criterion for acceptance of a test report is that the laboratory issuing the report should be ISO 17025 certified. Therefore, internal reports from ISO 17025 laboratories can be used to issue TERs.

What procedure should be applied when listing products with multiple brand names in TER?

TER is always released per brand per exporter. Therefore, exporters shipping multiple brands of the same product need to submit a Product Identity Declaration (PID) form as documentary evidence of the product. However, under the KUCAS procedure, exporters will be issued a new TER and will be required to pay corresponding fees.

What is a Technology Evaluation Report (TER)

TER is a "Technology Evaluation Report". TER is issued by an approved Certification/Inspection Body (CIB) on the basis of successful type testing or evaluation of test reports, or in some cases the transfer of an existing registration/license for a regulated product. The validity period of TER is the same as the validity period of the test report, that is, the CB report issued by the electrical product is 3 years and the non-CB report is 2 years. Test reports issued for all other products are valid for 2 years from the date of issue.

What is a Technical Inspection Report (TIR)?

TIR is also issued by one of the certification agencies based on the TER and additional documents issued for the goods. After obtaining the TIR, you can get

The following documents are required when applying for TIR.

TIR request (RTIR)

Proforma Invoice

Valid registration/license statement (for existing registered/licensed exporters)

Valid TER

How does the inspection process work?

Exporters need to be inspected in the exporting country by the same CIB (Certification/Inspection Body) that issued the TER. The relevant CIB will be inspected and tested prior to shipment (based on risk assessment and product type).

The importer is required to submit the TIR to a KUCAS eligible unit, which can then verify the validity of the TIR and TER through its database, which is continuously updated with the transferred data.

Technical Inspection Report (TIR)

What documents are required when applying for TIR?

The following documents are required when applying for TIR. More information on this is also available in the guide.

TIR request (RTIR)

Proforma Invoice

Valid registration/license statement (for existing registered/licensed exporters)

Valid TER

How does the inspection process work?

Exporters need to be inspected in the exporting country by the same CIB that issued the TER. The relevant CIB will be inspected and tested prior to shipment (based on risk assessment and product type).

What is a risk assessment system?

A risk assessment system is a model for determining the frequency of inspection and testing of cargo. The system takes into account various aspects of the product such as its type, manufacturing process, country of manufacture, brand value, previous compliance history, etc. The system is also similar to the selective procedures currently employed by other certification programs.

The risk assessment system also considers manufacturers who can provide evidence of quality control systems (ISO 9001, ISO 16949, etc. or equivalent standards) within their facilities. Such manufacturers will be subject to lower consignment intervention rates.

What happens if a shipment of controlled products arrives at a Kuwaiti port without TIR?

Products will be inspected and tested by the KUCAS Compliance Department, which may delay customs release of the goods or, in some cases, may result in re-export of the product if test/inspection results are unsatisfactory.


Can an issuing authority such as sgs arrange destination inspection for shipments that have a valid TER (issued by sgs) but failed to obtain TIR in the exporting country?

Exporters are always advised to obtain TIR in the exporting country. If the exporter fails to obtain TIR in the exporting country, Intertek can arrange for destination inspection in Kuwait. Importers should contact the agency office upon arrival of the goods in Kuwait and provide the Kuwait office with a copy of the relevant TER.

This process has its own drawbacks, however. First, the importer needs to obtain provisional clearance from a KUCAS eligible unit. After obtaining provisional clearance, the importer must transfer the goods to its warehouse and arrange for a technical inspection of the goods by the KUCAS Compliance Department. Given typical delays associated with government agencies, this process may take several days, and demurrage charges may apply.

Since the agency has transferred the data to PAI, does the importer need to submit the TIR to PAI for customs clearance?

The importer is required to submit the TIR to a KUCAS qualified unit, which can then verify the validity of the TIR and TER through its database, which is continuously updated based on data transmitted by Intertek.

What procedures should be followed for exporters who have a valid TER but transport goods without TIR?

If an exporter with a valid TER ships goods to Kuwait without TIR, the importer needs to contact the Kuwait office and provide a copy of the TER once the goods arrive at the port.

What are the new requirements for customs clearance of goods by PAI?

Customs clearance of goods now requires a customs clearance certificate. PAI has introduced a new requirement for importers to obtain a customs clearance certificate based on a valid TIR.

How does an importer obtain a customs clearance certificate?

Customs clearance certificates are issued by PAI and importers should apply on PAI’s new online system by registering their entity via the following link: https://ksm.pai.gov.kw/en/pages/default.aspx

Once you register and submit your customs clearance certificate application online, PAI will perform the verification. Upon successful PAI verification, the importer is required to pay a prescribed fee to generate a customs clearance certificate. After the customs clearance certificate is generated, Kuwait Customs will automatically receive the final release notice of the goods.

Is there a user guide on how to register an importer entity on PAI's new online system?

The user guide for registering an importer entity and applying for a customs clearance certificate on PAI’s new online system can be accessed via the following link: https://ksm.pai.gov.kw/sites/cm/en/Pages/Default.aspx

kucas certification fee

What is the fee structure of KUCAS?

For a list of applicable fees, click Kuwait Fee Structure.

Various problems

What is a passphrase?

If a product fails laboratory testing, the product is deemed substandard and a "Re-Export Order" is issued. Notify the importer and customs so that necessary action can be taken. In this case, the importer is obliged to submit evidence within 2 weeks from the date of order that the goods in question have been fully re-exported.

Can electrical products accept standards other than IEC?

Taking into account that the KUCAS scheme now includes other certification and inspection bodies (CIBs), it was decided that compliance with other standards equivalent to the IEC standards (e.g. BS EN standards, etc.) may be accepted regardless of the IEC version. It is important to note here that BS EN standards should still be up to date.

Related links :

Export Kuwait tir certification process cost timing kucas certification

Frequently Asked Questions FAQ about exporting Kuwait tir certification and kucas certification

Wireless product CITRA MOC certification application process and cost timing in Kuwait

Business Contact

Mr. Zhou Tel: +86 13530227809 13530227809

————END————

Discuss your shipment

Access World Trade(Shenzhen)Co.,Ltd

WhatsApp: +86 13530227809; Richchou.coc@gmail.com

Share the destination, product description, HS code if available, quantity and planned shipment date.