Frequently asked questions about export customs clearance compliance certification?
1. Frequently Asked Questions................................................................................................................................................2
1.1 What is conformity certification? ..................................................................................................................2
1.2 Which countries require conformity certification? .................................................................................................2
1.3 What is the certification process? ..................................................................................................................2
1.4 How much does certification cost? .................................................................................................................2
1.5 What documents should I submit if I want to apply for certification? .................................................................................................2
2. Certification precautions and technical instructions .............................................................................................2
2.1 Document review process......................................................................................................................2
2.1.1 Basic requirements for proforma invoice .............................................................................3
2.1.2 Basic requirements for test reports................................................................................................3
2.1.3 Batch Control Test Instructions................................................................................................4
2.1.4 Instructions for application for registered laboratory .............................................................................4
2.1.5 Product Equivalency Statement .............................................................................................................5
2.2 Inspection before shipment .............................................................................................................5
2.2.1 Precautions for inspection ........................................................................................................5
2.2.2 Basic requirements for bulk goods ........................................................................................................5
2.3 Instructions for the issuance of certificates......................................................................................................................6
2.3.1 Precautions for issuing certificates ........................................................................................................6
2.3.2 Final document requirements .............................................................................................................6
3. Accessories................................................................................................................................................................8
3.1 General process of compliance certification ........................................................................................................8
3.2 Proforma Invoice Style……………………………………………………………………………………9
3.3 Product Conformity Declaration (PID) Style .............................................................................................9
1. FAQ
1.1 What is conformity certification?
Conformity certification in international trade refers to certification activities carried out by a designated or recognized inspection and certification company, with the cooperation of traders, for goods exported to a specific country, based on the officially recognized standards of the destination country (place), through testing (if necessary), document review, pre-shipment inspection and other steps. Only by obtaining a qualified certification certificate can the importer clear customs at the customs of the destination country (place) and obtain the goods.
1.2 Which countries require compliance certification?
The main countries currently recognized for compliance certification are: Algeria, Botswana, Ecuador, Egypt, Ghana, Guinea, Côte d'Ivoire, Iran, Iraq (including the Kurdish region), Kenya, Kuwait, Lebanon, Russia, Saudi Arabia, Tanzania, Uganda, Zambia, etc. For details, please refer to the following link: (English)
1. 3 What is the certification process?
Usually there are several steps in sequence: confirm that the product falls within the scope of certification and applicable standards, the exporter submits existing test reports, pays certification fees, conducts document review, testing or control testing (if necessary), pre-shipment inspection, destination inspection (if any), issuance of certificates, etc. For details, please refer to the attachment "General Process for Compliance Certification"
1.4 How much does certification cost?
Usually, the fee is calculated according to the requirements of the importing country. The fee calculation method can be obtained at the following link. The institutional sales staff will calculate the cost, account number and other information in writing (including email) based on the pro forma invoice, container loading and other documents submitted by the exporter. For some charging standards, please refer to the following link to view relevant countries.
www.xbaohui.com
1.5 What documents should I submit if I want to apply for certification?
Usually, you can first submit the proforma invoice for shipment (for requirements, see 2.1.1 Basic requirements for proforma invoices), a test report to prove product quality (for requirements, see 2.1.2 Basic requirements for test reports), and an application form (please ask the agency contact person to obtain it)
www.xbaohui.com
2. Certification precautions and technical instructions
2.1 Document review link
2.1.1 Basic requirements for proforma invoice
Proforma invoice requirements include the following: (Refer to attachment 3.2)
u The name of the file can be Proforma Invoice, Invoice, Commercial Invoice, Contract, Sales Contract or similar documents.
u Document number (for example: proforma invoice number), document date, signature or seal required
u Importer’s English name and address (must be the company name and address in the certification destination country), exporter’s English name and address
u The port where the goods enter (the port of the certified destination country), the quantity and amount of each item, and the total FOB amount
u Description of each item, including customer brand (or nominal manufacturer name), customer model (or the only expression that can represent the product, generic product names are not accepted), specifications (if necessary), etc.
2.1.2 Basic requirements for test reports
The following conditions are necessary for reporting, but the review requirements are not limited to these. Important statement: All the following contents are only suggestions and explanations, and do not represent the acceptance criteria of BV audit documents. We will review the submitted documents one by one according to relevant requirements and notify you of the review results.
A. Standards: The standards based on the report must be the standards of the destination country, or equivalent international standards (such as ISO, IEC, EN can be referred to), and testing must be fully based on the differences in the destination country.
B. Qualifications: A third-party laboratory audited by ISO17025 (or equivalent standards). The laboratory is issued an accreditation certificate by an ILAC-MAC mutual recognition member agency (usually CNAS accredited in China). The accreditation scope covers relevant standards (or equivalent or similar standards), and the accreditation scope does not limit/exclude key items.
u CNAS-accredited laboratories can be queried at http://219.238.178.49/Acc_Search2.asp?Class=L
u For the equivalence between GB and international standards, please refer to the following website: http://sale.gb168.cn/Saleagent/Customer/Shopping/FindStandards.aspx?where=2&text=
C. Manufacturer's laboratory report: The test report issued by the factory or manufacturer's laboratory can be referred to, but some indicators of certain food-related, electrical appliance-related, building materials-related products do not accept the manufacturer's test report. Exporters can apply to the agency to register the factory laboratory in order to improve the effectiveness of the test report and increase the credibility of the report. For details, please refer to 2.1.4 "Laboratory Registration Application Instructions".
D. Details: The report is authentic (the report is compiled by the laboratory based on the test results of real products, without any unauthorized modifications, is not fabricated, etc., any false report will result in a failed audit and a fee will be charged), qualified (without any discrepancies, with a summary of qualifications, etc.), sufficient (completely lists all standard terms, meets all differences requirements of the destination country, and has sufficient details) (exhaustive graphic description, etc.), valid (signature of relevant laboratory personnel, time limit does not exceed the years required by the institution, etc.).
E. Consistency: The reported product model must be completely consistent with the shipped model, and the product parts, process, appearance, packaging, instructions and other details related to compliance with standards must also be completely consistent.
F. Single batch report: Some products require that the test report must be for the shipping batch. (For example: food) There are additional requirements for batch test reports as follows:
u The test report must note the proforma invoice number of the shipment batch (or organization number, or other unique identification number, which must be marked on the proforma invoice accordingly).
u The brand (or manufacturer), model (or similar product type identification name, such as a special product name), and batch (or production date) of the product on the test report must be consistent with the corresponding statements on the shipment invoice.
u (Recommendation) The test report should have photos that clearly show the brand (or manufacturer), model, and batch (or production date) of the sample.
2.1.3 Single batch control test instructions
If batch testing is required, the following points should be noted:
G. The results of the control test are only valid for the current batch of goods.
H. Control testing fees are payable prior to testing.
I. Test results will be representative of the overall batch. If the sampling test results are unqualified, the agency will issue a non-conformity report for the entire batch of goods.
J. It is recommended that exporters wait for the control test results to pass before confirming with the agency's technical reviewers whether they can ship. Regardless of the outcome, control testing is conducted at the exporter's own risk.
K. If you want to apply for control testing, please ask the agency service staff for the "Control Testing Application Form". The control testing application form will be different for different products. Please contact the Bureau Veritas contact person to confirm the estimated testing period, cost, sample delivery (laboratory) address, etc.
L. Control Test Sampling Method: Sampling by agency technical auditors as required. Samples are sent to the laboratory by the factory or exporter. After the sample is sent, please reply to the email immediately and tell the sender, courier name and courier tracking number. for timely follow-up.
2.1.4 Instructions for laboratory registration application
If you want to apply for laboratory registration and provide the following information, the institution may charge a fee to conduct a laboratory audit.
M. Submit an application form for a registered laboratory. In the application form, the equipment details, photos, standards for testing, etc. must be listed in detail. All items in the application form must be filled in completely.
N. Document attachments mentioned in the application form must be provided, such as: ISO17025 accreditation certificate (if any), or the factory's ISO9000, ISO 16949, ISO 22000 certificate, etc.
O. Provide templates or samples of test reports issued according to these standards.
P. The applicant must promise that the information and documents provided are true and valid; if they are untrue, the institution can suspend the review and issue a disqualification report. Any false report will result in a failed audit and a fee will be charged
2.1.5 Product equivalence statement (refer to attachments 3.3 and 3.4)
If the model and/or brand of the product you ship (on the Proforma Invoice) is different from that on the certificate or test report (after confirming that the product itself is exactly the same, but a different model &/brand is used for commercial reasons), you can fill in the product equivalence statement, that is: PID. The PID must be filled in, signed and stamped by the technical person in charge. Things to note are as follows:
Q. Please request the "Product Identification Declaration" form from your institutional contact
R. Be sure to fill in the form completely according to the requirements, sign and seal it, and attach photos of the product appearance and nameplate (label).
S. We will confirm the consistency of the product through on-site inspection of parts or other methods.
2.2 Inspection before shipment
2.2.1 Inspection precautions
u Contact information: Please contact the local inspection center to arrange inspection, and be sure to tell the inspection center the correct agency service number. See attachment for contact information.
u Inspection time description: Usually, an appointment for inspection must be made three working days in advance. Once the local inspection office of the organization has made an appointment with you, please be sure to keep the appointment, prepare the goods as required, and complete the final packaging (including marking and shipping marks). No inspection will be arranged on holidays. If there are any changes or uncertainties, please be sure to formally notify the local inspection center of the organization to change the inspection arrangements before 2:00 pm on the working day before the original inspection date. Otherwise, a re-inspection fee will be charged. For example: if the inspection is originally scheduled for March 23, 2009 (Monday), and then you plan to postpone it to March 24 (Tuesday), then you must formally notify the local inspection center of the organization to change the arrangement before 2:00 pm on March 20 (Friday).
u Sampling instructions: All goods must be 100% ready and will be randomly inspected by inspectors in accordance with the sampling plan.
u Instructions for inspection preparation: Exporter representatives must be on site to guide, coordinate and assist. Inspectors are allowed to carry out normal inspection activities such as recording and taking photos. There is sufficient time to carry out inspection. The goods are neat and orderly. The inspector can easily retrieve the goods and can ask the exporter's representative to open the packaging for detailed inspection. (If loading supervision is required), empty containers should arrive in advance and the loading time should be as short as possible. (If the packing list has not been submitted at the time of application) The exporter's representative should prepare the packing list and hand it to the inspector on site to verify the product and packing details.
2.2.2 Basic requirements for bulk goods
The following are only basic requirements. For standard requirements, please refer to the corresponding standards.
u Large product parameters must be consistent with the test report.
u The country of origin must be marked on the product (some countries do not accept the abbreviation of the country of origin). If the product is too small to be marked, it can be marked on the sales package. If you are unsure, please confirm with the institution in advance.
u The product and packaging must have corresponding product name, brand, model and other information, and this information must be consistent with the shipped Porforma Invoice (or Invoice).
u The language requirements for logos should refer to standards and official requirements of the destination country. It is usually required to indicate the official language of the destination country). If you are unsure, please confirm with the agency in advance.
u Do not infringe intellectual property rights, such as counterfeiting famous brands, trademarks, designs, etc.
u There cannot be labels that mislead the country of origin, such as Designed in Japan, Model of Korea, etc.
u Marking should be clear, legible and durable
2.3 Description of the certificate issuance process
2.3.1 Precautions for issuing certificates
u Contact method description: Please see the attachment for the certificate issuance contact person. It is recommended that you submit the final document by email (see 2.3.2 Final document requirements), submit the certificate issuance request to the agency in a timely manner, and write the agency service number on the email title.
u Inspection timeliness instructions: If there are no changes in the final documents and the documents provided during the application, or if relevant documents cannot be provided, please inform us clearly, otherwise it may cause delays in issuing the certificate. If no certificate is required within 90 days after the inspection, the inspection results will automatically become invalid. If you still need certification after 90 days, you need to pay again to apply for inspection.
u Description of the basis for issuance of certificate: The organization will issue a certificate based on the final documents and other information provided by you, that is: all certificate information will be entered based on the information you provided, inspection results, and official requirements of the destination country. To improve efficiency, drafts are usually not confirmed.
u Express delivery instructions: The certificate and invoice will be sent to your company together. Please inform the express delivery address in time. If there is no special instructions, we will send it to the contact address you left before. Express delivery fee is free for domestic addresses. We can send it directly to an overseas address upon request, but it must be sent on delivery (or the applicant must pay the express fee in advance).
u Certification fee invoice description: According to the tax bureau’s notice on replacing business tax with value-added tax, our company adopts value-added tax. Please provide the "Special Value Added Tax Invoice" invoicing information, and we will issue an invoice based on your confirmation. If payment is made in foreign currency, we will only issue a pro forma invoice.
2.3.2 Final documentation requirements
The final documents usually required include: final invoice, packing list, some destination countries require a scanned copy (or fax) of the first leg of the bill of lading, and some destination countries require a "Loading Condition Statement". Please ask the agency contact person for this.
T. The final invoice requirements are as follows:
u The name, detailed address and telephone number of the importer and exporter must be included on the invoice. Must be signed or stamped;
u The invoice must indicate the total FOB price, and list the FOB price of each line of goods separately. (Freight fees, insurance premiums, etc. are allowed
project).
u List the product brand and model, and try to list detailed product descriptions and product specifications. HS code of each item number (at least the first 6 digits, this requirement is not limited to the form, it can be listed in a separate email or attached to the invoice,)
u If the invoice contains more than 5 items/goods, please also provide the Excel/word document of the invoice, which can speed up the issuance of certificates.
Additional communication from netizens:
Generally, the countries that have done more domestically include Saudi Arabia, Iraq, Kenya, Egypt and Nigeria. Most products exported to these two countries fall within the scope of mandatory VOC inspection.
Generally speaking, VOC certified projects include Iranian VOC and Zambian VOC. Saudi Arabia’s certification program is SASO, and Iraq’s is COC.
Business Contact
Mr. Zhou Tel: 13530227809
E-mail: Richchou.coc@gmail.com
————END————

