Gabon COC

What to do about Gabon COC certification? PVoC application process, information, fees and customs clearance requirements

English translation of the Chinese source. Source publication date: 4 December 2022. Regulatory requirements, charges and schedules may have changed; confirm the current position before shipment. Processing and freight estimates are not guarantees.

Gabon COC certification process pricing and timing

Gabon coc certificate template

Gabon coc certificate template.png

What is Gabon COC-Gabon pre-export product conformity certification

Gabon PROGEC (Ghana’s Conformity Assessment Program) (PROGEC) is Gabon’s pre-export product conformity certification. Starting from August 1, 2015,

Gabon’s Bureau of Standards (AGANOR) has implemented a new product conformity assessment program for certain imported consumer goods. All regulated products covered by the PROGEC program must be accompanied by a qualified test report or certificate.

This measure aims to prevent unsafe and low-quality goods from entering the Gabonese market. For goods that comply with PROGEC certification, a Gabon COC certificate is issued. This certificate is a necessary document for customs clearance at the destination port in Gabon.

If these materials cannot be provided, the product will need to be inspected at the destination port, which will incur high costs and may also cause delays. If it ultimately fails to pass the standard, it will be prohibited from entering customs and returned. It will be enforced starting from March 1, 2016.


Gabon COC certification application process and required information

1. Determine whether export products require PROGEC certification

All goods exported to Gabon (except for goods exempt from inspection) must obtain a COC certificate. This certificate is a necessary document for customs clearance at the destination port in Gabon.

2. Gabon COC certification (PROGEC certification) controlled product list (please provide the product name and HS CODE to confirm with our company whether the product is exempt from inspection)

Only the products listed below are exempt from this program

Munitions Scrap Metal

Live animals

Newspaper

Reimported goods

Personal property and repatriation items (including vehicles of residents repatriated to Gabon)

Postal parcels and express delivery without commercial value

Business Sample

Personal gifts

Donations provided by foreign governments, institutions or individuals during disasters

Imported gifts and supplies for the embassy or consul’s own use

Imported products with a total value not exceeding 930 USD

The above product categories are for reference only. The Gabonese government may change the list of controlled products at any time.


Select Gabon PROGEC inspection method

Gabon PROGEC inspection has three methods:

ROUTE A: Shipment Inspection and Certification

This method is mainly suitable for exporters/producers who export to Gabon very rarely every year (generally no more than three times)

In Route A, goods to be exported to Gabon must undergo product performance testing (see step 4 for details) and on-site inspection before shipment to prove that the product complies with relevant standards, basic product requirements or manufacturer specifications (see selection criteria - step 2 for details).

This method is applicable to any trading group. The steps for shipment of goods and product certification are as follows:


Step 1: The exporter submits the inspection application form

The exporter should completely fill in the inspection application form (RFC = Request For Certification) and submit it to our operation center. At the same time, the following documents need to be submitted:

1. Product parameter information or detailed product description (indicating the intended use of the product) - (must be provided).

A copy of the product technical specifications provided by the production factory (please provide if available).

2. Instructions for use/operation (when appropriate)

3. Product production information, such as batch number, batch size, manufacturer name, production date, validity period, manufacturer status, etc. – (when appropriate)

4. Proforma Invoice

5. Third-party test report (please provide if available)

6.URC scan

Note: The quality and completeness of the above documents will directly affect the time and cost of the entire application inspection process.


Step 2: Review the RFC and related documents submitted by the exporter

The agency will review relevant documents for completeness to:

1. Determine the applicable Gabon product standards and/or equivalent international standards (applicable standards must be applied for in advance)

2. Determine whether the basic requirements for health, safety, environment and other relevant standards are met

3. Establish a product risk profile (to determine the level of risk intervention)

4. Prepare inspection and test instructions

The organization will generally respond to the exporter’s inspection application within 48 hours and include the following content:

a. Missing files (if any)

b. Basic requirements that must be met (according to specified standards) and level of intervention (e.g., informing exporters where testing must be performed)

c. Appointed inspection date and schedule and obtain confirmation from the exporter

Note: The inspection should be arranged within 3 days after the application materials have been reviewed and the exporter has completed all required application documents. If the exporter has submitted all the required documents for inspection application for the first time, the inspection can be arranged within 3 days after receiving all documents.

Unless the inspection applicant requests a delay in scheduling the inspection.


Step 3: Testing of shipped product (if required)

The inspector will randomly sample the goods prepared for export by the exporter and pack them into different packaging bags with appropriate identification marks for future product testing.

Product testing is limited to the requirements and parameters of the applicable standards that the product must meet, and is conducted in any of the following laboratories:

1. Independent laboratory that complies with ISO/IEC17025 standards

2. Any laboratory or manufacturer's laboratory that does not meet the ISO/IEC17025 standard, but the test experiment must be conducted under the on-site witness of an inspector (this option is only applicable if a local laboratory that meets the above cannot be found).

On-site witness testing must be performed by professionals who are familiar with the product and test methods.

If testing is not economically feasible, for example, too many test items, low product value, unassembled mechanical products, etc., testing can be replaced by reviewing the following relevant documents:

1. Test report provided by product manufacturer

2. Safety certification mark/quality certification mark/national licensing document (such as CE mark, type test qualification report, etc.)

3. Relevant quality management system certificates, etc.


Step 4: Cargo inspection by relevant designated inspector

The on-site inspection will be carried out according to the inspection instructions prepared in advance. The inspection will mainly focus on the labeling, packaging, product validity period (when applicable), and checking that the product complies with relevant test reports. And depending on the specific situation, focus on implementing functional evaluation of the product.

After completing the on-site inspection, the inspector should immediately fill in a detailed inspection report, which should indicate the problems found during the inspection and rectification suggestions, and leave a copy to the exporter. Every discrepancy issue reflected in the discrepancy report should be immediately reported to the exporter for its attention.

NOTE: Completion of on-site inspection of a product does not mean completion of the conformity assessment process. The final compliance conclusion of the product will be made by the inspector after a comprehensive evaluation of the on-site inspection report, test report and related quality documents.


Step 5: Final inspection certificate issued by PROGEC partner agency

Based on the received inspection report, test report/document review report, etc., the agency will give the inspection results and issue a certificate (certificate of compliance or certificate of non-compliance) within 3 working days of receiving the report and final invoice.

NOTE:

1. If a product undergoes performance testing, a final conclusion on product compliance will not be obtained until the product completes testing.

2. The exporter can contact our business operation center to obtain the Certificate of Conformity (CoC - Certificate of Conformity) or inquire about the product compliance certification results to facilitate shipment of goods.



Gabon COC certification on-site inspection requirements:

1. An on-site representative of the exporter must be designated to handle matters related to the inspection site and sign on behalf of the exporter (applicant) on the on-site inspection report to confirm its contents. Exporters should be aware that the on-site representative’s signature is legally binding;

2. The exporter is obliged to provide necessary equipment for on-site inspection and must be calibrated;

3. When it comes to sampling and testing, the exporter should send the sample to our company as required by the inspector.

4. Please arrange the necessary labor and equipment to complete the unpacking, sampling and repackaging of the goods in a timely manner to avoid delays;

5. When the goods are shipped in full container, the container must meet the following requirements:

—The container must arrive at the inspection location at the agreed inspection time;

- The container must be in an empty state and cannot be pre-loaded. It can only be loaded after the inspector has completed the inspection;

— The hasp on the right side door of the container must be intact to allow the inspector to apply the seal;

—Containers must be undamaged to prevent seawater from penetrating and damaging the goods during transportation.

6. Changes in the inspection time and location must be submitted to our company in writing before 16:00 one working day before the agreed date. Otherwise, the inspection will be deemed to have failed and a new inspection will be scheduled and a re-inspection fee will be charged.

7. If it is found during on-site inspection that the goods need rectification and the rectification measures cannot be completed within a short period of time, re-inspection must be arranged and the re-inspection fee must be paid.

Gabon COC certification processing fee price and timing

Different products have different prices and fees. Please contact us for details.

With complete information, it takes about 3 days to complete the inspection and issue a draft. After the draft certificate is confirmed, a formal certificate can be issued.

Business Contact

Mr. Zhou Tel: +86 13530227809 13530227809

Related links

Gabon COC certification process pricing and timing (xbaohui.com)

BIC BIETC N BESC Gabon Electronic Tracking Order Process Cost timing (xbaohui.com)

Some cooperative customers

Gabon coc.png

————END————

COC certification:

Botswana SCSR             Kenya COC              Egypt COC                    Ghana COC                 

Gabon coc                     Mozambique COC           Cameroon COC                 Côte d’Ivoire COC                

Nigeria COC             Tanzania COC           Uganda COC                Morocco COC

Algeria COC          Ethiopia COC         South Sudan COC                Congo COC

Libya COC                Zimbabwe COC            Kenya coc                 Syria COC              

Russia and the Eurasian Economic Union EAC


Iraq COC                Iran COC                 Philippines COC PSI          Lebanon COC  

Indonesia PSI                    Pakistan COC PSI     Bangladesh COC                UAE COC

Kuwait COC                Saudi coc                Qatar COC           Ecuador COC    

Cambodia coc

————END————



Gabon coc certification, Gabon coc, export Gabon certification


Discuss your shipment

Access World Trade(Shenzhen)Co.,Ltd

WhatsApp: +86 13530227809; Richchou.coc@gmail.com

Share the destination, product description, HS code if available, quantity and planned shipment date.