Exporting to Kenya and Kenyan PVOC/COC certification knowledge
1. PVOC Program Overview
The PVOC program is a conformity assessment program applicable to products from each exporting country to ensure that products comply with applicable Kenyan standards, approved specifications and other applicable regulations.
1.2. Legal basis of PVOC scheme
The PVOC program was launched by KEBS on September 29, 2005 by issuing Legal Notice No. No. 78 of July 15, 2005, issued by the then Minister of Trade and Industry. This Legal Notice has been superseded by Legal Notice No. No. 127, June 19, 2018. On 5 December 2019, the Cabinet Secretary of the Department of Trade, Industry and Cooperation withdrew the Legal Notice and issued Legal Notice No. 183.
On 28 April 2020, Legal Notice No. 183 was withdrawn and replaced by Legal Notice No. 78 (Annexure 4). The plan is also fully compliant with Article 5 of the WTO TBT Agreement.
1.3. Objectives of the plan
Ensure product quality, health and safety and environmental protection for consumers.
Ensuring expeditious clearance of compliant goods at ports of entry to facilitate trade.
Protect the country from unfair trade practices and dumping of substandard products by ensuring that imported products meet the same requirements as locally manufactured products.
Maintain national security
To prevent deceptive trade practices.
Improve the efficiency of customs clearance of imported goods at the port of entry
1.4. Program operation
This program is operated on behalf of KEBS by an accredited third-party inspection company.
The world is divided into nineteen (19) regions based on distance and trade volume. In addition, the program offers multiple partners for most regions to increase efficiency.
Certification is based on Kenyan standards, approved specifications and other applicable regulations.
2. Terms and Definitions
COC – Certificate of Conformity
COI-Certificate of Inspection
COR - Certificate of road fitness for motor vehicles
DVS-Department of Veterinary Services
IDF-Import Declaration Form
KEPHIS-Kenya Factory Health Inspection Service
NCR-Nonconformity Report
PCPB-Pest Control Products Board
PPB-Pharmaceutical and Poisons Board
PVOC – Pre-export standards compliance verification
PVOC Partner - KEBS - Designated Inspection and Certification Company.
QMS-Quality Management System
RFC - Certification Request
WETC-Waiver Evaluation Technical Committee
Mobile Equipment - Refers to bulldozers, agricultural/industrial machinery, excavators, graders, gravel crushers, rollers, forklifts, wheel loaders, rolling stock/trucks, asphalt milling machines, mobile cranes and other off-road vehicles.
3. Responsibilities under the PVOC Program
3.1. Importer
a) Ensure that KEBS is informed of the intention to import any goods in the prescribed form
b) Notify PVOC partners via a Request for Certification (RFC).
c) Ensure that its suppliers are familiar with the import quality requirements set out in relevant Kenyan standards, approved specifications and other applicable regulations, and that their goods are accompanied by a Certificate of Conformity (COC), Certificate of Inspection (COI) or Certificate of Performance (COR) issued by the designated PVOC partner.
d) Ensure that imported goods comply with Kenyan standards, approved specifications and other applicable regulations.
e) Ensure that cargo not accompanied by a COC, COI or COR as required in (B) above is submitted to KEBS for destination inspection and/or testing before release from the port of entry.
3.2. Exporters
a) Ensure that its products or goods comply with relevant Kenyan standards, approved specifications and other applicable regulations by conducting tests before shipment.
b) Ensure that the designated PVOC partner has issued a COC, COI or COR for all products subject to the PVOC program prior to shipment.
3.3. PVOC Partners KEBS has signed contracts with eight (8) inspection companies (PVOC Partners) to carry out PVOC activities. They are:
a) General merchandise
The role of these partners is to conduct conformity assessment activities in the country of origin for general goods, motor vehicles, parts and components and mobile equipment imported into Kenya. These activities include inspection, sampling, testing, sealing of fully loaded containers and, where applicable, issuance of COC/COIS/CORS/NCR.
Unless otherwise requested in writing by the exporter, the exporter should be contacted to arrange inspection, and upon receipt of the exporter's completed certification application form and other relevant documents, physical inspection of the merchandise should be conducted within four (4) working days (sea shipment) and one (1) working day (air shipment).
Note: The importer or exporter must confirm the details in the draft COC/COI/COR provided by the PVOC partner before issuing the final COC/COI/COR. KEBS does not allow modifications after issuance
A Certificate of Conformity is issued within two (2) working days (for sea cargo) and one (1) working day (for air cargo) upon receipt of final documentation from the exporter/importer and fulfillment of payment terms, which verifies that the goods comply with applicable standards, specifications and/or regulations.
3.4. KEBS ensures that only quality goods enter the country in compliance with the provisions of the Standards Act, Chapter 496, the Laws of Kenya and the Standards (Verification of Standards Conformity and Other Applicable Regulations) Order 2020, thus promoting fair trade practices while protecting the health and safety of consumers and the environment.
3.5. Partner Government Agencies All other government agencies responsible for international trade operations shall continue to be responsible for carrying out their respective mandates in accordance with the existing legal framework, subject to the guidelines provided by the Government Circular of 4 June 2019 reference OP/CAB 9/83A.
4. PVOC range
All imported goods shipped to Kenya, including goods regulated by partner government agencies, except those listed in the schedule of the Legal Notice (Annex 4), shall undergo mandatory certification of the country of origin or country of supply before shipment to the country or at the port of destination. Products in Annex 3 shall not enter the country without a COC/COI/COR issued by the PVOC partner of the supplying country.
5. Kenya PVOC certification process
5.1 Certification Authority
Currently, a total of three institutions in Greater China have been authorized by Kenya KEBS to implement the PVOC plan, namely CCIC (China Central Inspection and Quarantine), WSCT (Shenzhen World Standard), and HANSOM (China Hansheng)
5.2 Responsible areas of each organization
WSCT (Shenzhen World Standard) South China Region, including Guangdong, Fujian, Hainan, Guangxi, Hong Kong, Macau, and Taiwan
CCIC (China CCIC) East China, etc.
HANSOM (Zhongdi Hansheng) three eastern provinces
5.3. Certification route for general cargo
The PVOC program is designed to provide maximum flexibility to exporters and importers by providing four (4) possible routes to obtain COC/COI. The applicable route depends on how often the exporter ships to Kenya and the level of compliance they are able to demonstrate initially when applying for certification.
5.3.1. Route A (Commissioned Inspection and Testing)
Under this route, shipped products must undergo testing and physical inspection to demonstrate compliance with relevant standards and regulatory requirements. This route is open to all products exported by traders or manufacturers. In addition, all container cargo under this route must be sealed by a contract inspection agency, and the seal and container number must be noted in the COC.
The following products are only eligible for Pathway A certification:
Animal and fishery products (fresh and frozen - not further processed)
Bulk petroleum products and base oils
Bulk grains and legumes such as rice, wheat, barley, beans, corn, etc.
Edible cooking oil
Fertilizer
Fresh dairy products
Fresh garden products
Liquefied Petroleum Gas (LPG)
Motorcycle helmet
Steel, such as flat steel, angle steel, channel steel, round steel, deformed steel bars, RHS and SHS
Sugar
Tires
Second-hand or second-hand goods
5.3.2. Path B (Product Registration)
This pathway registers such products through a PVOC agent, providing a fast-track certification process for goods with reasonable and consistent quality levels. Exporters who frequently ship similar products are advised to register their products. Registration is valid for one year. Shipments of registered products are exempt from mandatory testing and certification can be based solely on physical inspection. However, registered products still need to be tested regularly to ensure compliance throughout the registration period.
5.3.3. C Router Product License:
This pathway is only open to manufacturers who can demonstrate the existence of a quality management system within their production/manufacturing processes. It involves the audit of these production processes according to ISO/IEC TR 17026:2015 and the licensing of products produced by authorized PVOC agents. Upon successful completion of the process, the manufacturer will receive a license for the relevant product, which is valid for three (3) years. Licensed products shall undergo random physical inspection by an authorized PVOC agent prior to issuance of a certificate of conformity and subsequent shipment. However, the PVOC agent should conduct supervisory testing during the validity period of the license.
NOTE: The PVOC agent will review the Request for Certification (RFC) received from the exporter before determining the most appropriate certification path and applicable standards to be used in the certification process.
5.3.4. Route D Import Comprehensive Cargo
This route is only open to registered containerized cargo importers. This is a shipment containing various products or goods, usually in smaller quantities, or packages belonging to several consignees who pool or combine their packages to form a consignment that may be declared in the country of supply as belonging to different persons, in the port of destination as belonging to one importer (consolidator), and upon arrival broken down into original separate shipments for delivery to their respective owners.
At the destination port or consolidation warehouse.. For the purpose of this procedure, the container shipment should contain no less than 3 different products/brands. Registered consolidators, who consolidate individual items from different individuals or sources into one shipment for import, should apply for certification and submit a packing list and commercial invoice to the PVOC agent at least forty-eight (48) hours prior to inspection. The PVOC partner shall assign the required number of inspectors to the merger point to conduct inspections and then issue a Certificate of Inspection (COI). High-risk cargo imported via this route should be directed to a KEBS-listed destination prior to release. Importers of such goods must pay for testing at destination.
In addition, all container cargo under this route must be sealed by the contract inspection agency, and the seal number shall be indicated in the COC/COI.
5.4. Fees charged under the PVOC scheme
Method A: 0.60% of FOB value minimum USD 265 maximum USD 2700
Method B: 0.55% of FOB value, minimum USD 265, maximum USD 2700
Method C: 0.35% of FOB value, minimum $265, maximum $2700
Method D: 0.75% of FOB value, minimum USD 265, maximum USD 2700
The above fees include document verification, physical inspection and sampling, including sealing of the container where applicable. Fee does not include:-
Laboratory testing
Manufacturer License
Registration fee
Sampling of Bulk Cargoes
Recheck.
These services shall be billed directly by the contractor on a case-by-case basis.
5.5. Enhanced Certificate of Conformity
The government, through a notification dated June 4, 2019 referring to OP/CAB 9/83A, directed to reduce the number of port operators from 28 to 4. In order to ensure that the entry of goods meets quality standards and complies with other regulatory requirements, Korea Exchange Bank is authorized as the lead agency to coordinate the inspection of goods in the country of origin/supplier country, and issue concentrated COC if the goods meet the requirements, and issue NCR for goods that do not meet the requirements.
6. Motor vehicles, mobile equipment and their used parts
6.1. Inspection of motor vehicles, mobile equipment and parts
6.2 Relevant entrusting agencies
6.3. Main features of KS 1515:2000 The following are the key requirements of this Kenyan Standard which must be complied with before further inspection can be carried out:
i. Vehicle must be right-hand drive.
ii. Vehicle must be less than 8 years old from the year of first registration. iii. The difference between manufacturing and registration must be less than one year.
Only vehicles that meet the preliminary requirements above will be physically inspected.
Road vehicles are also inspected for evidence of steering side modifications and modified road vehicles are not allowed to be imported into Kenya.
Note: KS 1515:2000 applies to road vehicles, including motorcycles, cars, vans, buses, trucks and trailers of all sizes.
6.4. Inspection Fees under the PVOC Scheme 6.4.1. Motor Vehicles
Japan USD 155
Singapore USD 155
South Africa $225
Thailand USD 250
United Arab Emirates $192
UK $225
6.4.2. Mobile Equipment and Used Spare Parts
0.5% of FOB value, minimum USD 265, maximum USD 2700, per piece or batch of goods submitted for inspection.
7. Goods issued with a Non-Conformity Report (NCR) Goods issued with an NCR are not allowed to enter Kenya.
Shipments bearing NCR issued by a PVOC partner may not be submitted to another partner for certification.
8. Importing from countries where PVOC partners do not exist
General cargo and motor vehicles imported from countries where the PVOC partner does not exist are subject to destination inspection with a minimum customs value of $265 and a maximum of $2,700 per motor vehicle unit or consignment submitted for inspection at 0.6%.
9. Exemptions and Exemptions from PVOC
The criteria for exempting specific importers from PVOC requirements are shown in Appendix 1.
Other exemption requests shall be processed in accordance with the provisions of Legal Notice No. No. 78, April 28, 2020, Article 10 as Exemption Evaluation Technical Committee (WETC) standard, see Annex 5. Importers seeking an exemption should write to KEBS seeking the exemption and provide all necessary documentation for review.
10. Handling imported goods at the destination port (Kenya)
Goods with certificates of conformity will receive expedited customs clearance upon arrival at the port of entry.
Copies of COR and COC must be submitted to both KEBS and KRA for cargo clearance at the port of entry.
11.Contact information
Questions regarding inspection requirements should be directed to KEBS via the following contact details:
Email: Richchou.coc@gmail.com Phone: 13641409693
http://nxw.so/11OPYe
_______END_______


